Wispeco Roll-A-Door RC-1

Need help?

Do you have a question about the Wispeco Roll-A-Door RC-1 and is the answer not in the manual?

Summary

Safety Rules

Important Safety Rules

General safety warnings and recommendations for operation and installation.

Features

Safety Systems

Describes ISS and Photo Electric Beam.

Operational Modes

Manual Operation

Operating Controls

Control Buttons and Their Functions

Limit and Force Adjustments

Input Connections

Manual Mode Selector

Installation Procedures

Pre-Installation Requirements and Checks

Covers side room, door balance, and hand selection.

Drive Assembly and Curtain Mounting

Installation Settings

Setting Limit Switches

Adjusting cams and screws for open/close positions.

Setting Limits for Right Hand Installation

Specific procedure for right-side mounting.

Open Limit Adjustment

Installation Settings (cont.)

Close Limit Adjustment

Fine-Tuning Limit Adjustments

Setting Limits for Left Hand Installation

Specific procedure for left-side mounting.

Safety Force Configuration

Setting and Testing Safety Obstruction Force

Procedures for setting, adjusting, and testing force.

Transmitter and Feature Configuration

Transmitter Code Programming

Storing and programming remote transmitter codes.

Transmitter Control and Code Management

Optional Safety Beam and Auto Close Setup

Installing P.E. beam and setting auto-close time.

Faults and Remedies

Troubleshooting Common Door Opener Issues

A comprehensive list of symptoms, causes, and solutions.