WITA ADELINO AP User Manual

BY
Installations- und Betriebsanleitung
Servicehandbuch
Modell: AP, APS, APS-A, APS-B, APS-C, APS-D
Vor der Inbetriebnahme sicherstellen, dass die Pumpe geerdet ist.
Prüfen, ob der Fehlerstromschutzschalter ordnungsgemäß angebracht ist.
Die elektrische Pumpe nicht berühren, während sie in Betrieb ist.
Die elektrische Pumpe nicht ohne Wasser betreiben.
Warnung

WITA ADELINO AP Specifications

General

Brand	WITA
Model	ADELINO AP
Category	Water Pump
Language	English

Summary

Service Manual

Model: AP, APS, APS-A, APS-B, APS-C, APS-D

Lists the specific models covered by this service manual.

EC Declaration of Conformity

Safety Warnings and Precautions

General Warnings

Essential safety instructions before operation, including grounding and avoiding contact.

Children, Pressure, and Electrical Warnings

Safety guidelines for children, system pressure, and electrical safety.

Symbol Meanings and Statement

Explanation of hazard symbols and warranty exclusions for improper use.

Safety Precautions

1.1-1.4 Safety Precautions

Ensuring grounding, leakage protection, safe operation, and maintenance practices.

1.5-1.7 Safety Precautions

Guidelines for liquid compatibility, installation environment, and winterization.

Product Information

2.1 Pump Applications

Details the various uses of vortex-type micro clean water pumps.

2.2 Pump Nameplate

Explanation of the information and data found on the pump's nameplate.

2.3 Operating Conditions

Specifies the environmental and medium conditions for normal pump operation.

2.4 Pump Wiring Diagram

Illustrates the internal wiring details for different pump series.

Technical Parameters

3. Technical Parameter

Provides a detailed table of technical data for various pump models.

Application Examples

4. Example of Applications

Illustrates typical uses of the electric pumps in household and well lifting scenarios.

Installation Instructions

5.1-5.2 Installation

Pre-installation checks, pump fixing, and inlet/outlet pipe connections.

5.3 Usage & Pre-Operation Checks

Guidelines for initial priming, operation, and pre-use checks.

5.4 Installation Environment & Precautions

Recommendations for installation, heat dissipation, drainage, protection, and adjustments.

Wiring and Operation Limits

Wire replacement guidelines and operating limits for closed outlet valves.

Maintenance

6.1-6.2 Maintenance

Inspecting insulation resistance and ensuring safety before maintenance.

6.3-6.7 Maintenance

Procedure for maintenance after hours, frost protection, storage, pressure tests, and tank checks.

Troubleshooting

7. Troubleshooting & Starting

General guidelines and common faults related to pump starting.

Flow, Pressure, and Motor Faults

Diagnosing and resolving issues with flow, pressure, motor operation, and stator windings.

APS-A/C/B Faults

Specific faults and remedies for APS-A, APS-C, and APS-B self-priming pumps.

APS-D Series Fault Codes

Explanation of fault codes and remedies for APS-D series electric pumps.

Recycling Information

8. Recycling Information

Instructions for environmentally sound disposal of the product and batteries.

Appendix

AP Peripheral Pumps

Performance curves for AP series peripheral pumps.

APS Self-Priming Peripheral Pumps

Performance curves for APS series self-priming peripheral pumps.

APS-B, APS-C, APS-D Curves

Performance curves for APS-B, APS-C, and APS-D series pumps.