What to do if Witeg Wisd WIR have no power?
If your Witeg Accessories unit is experiencing a power failure, you should: * Verify the supplied voltage is present. * Ensure the power connection and power cord are properly connected and undamaged. * Confirm the MAIN Power Switch is in the “ON” position. * Check the fuse, as it may be blown.
Why is my Witeg Accessories unit not heating up?
If your Witeg Accessories unit isn't heating, make sure the MAIN Power Switch is turned “ON”. Also, verify that the set temperature (SV) is correctly set using the Jog-Dial knob. Finally, check that the Safety switch is set higher (min. 10°C-20°C) than the set temperature (SV).
What to do if Witeg Wisd WIR Accessories unit is not refrigerating?
If your Witeg Accessories unit isn't refrigerating, first ensure that the MAIN Power Switch is “ON.” Next, check that the set temperature (SV) is correctly set using the Jog-Dial knob.
Why is my Witeg Wisd WIR heating, but not reaching the set temperature, or the temperature fluctuates?
If your Witeg Accessories unit is heating but not reaching the desired temperature or if the temperature fluctuates, verify that the set temperature is higher than the ambient temperature (it's recommended to set it at least 10°C higher). Also, check that the safety switch is set higher (min. 10°C-20°C) than the set temperature. Ensure that the ventilation openings are closed. A problem in the sensor or main controller can also cause this issue.
What does ERROR 3 mean on Witeg Wisd WIR?
ERROR 3 on Witeg Accessories indicates a door open alarm, which appears when the door is open. If the error occurs while the door is closed, check if the Limit Switch is pressed properly.
What does ERROR 1 mean on Witeg Wisd WIR?
ERROR 1 indicates a Temperature Sensor or main controller Error.
General| Type | Infrared Thermometer |
|---|---|
| Power Supply | 9V battery |
| Manufacturer | Witeg |
| Temperature Range | -50°C to 1000°C |
| Accuracy | ±1.5℃ or ±1.5% |
| Resolution | 0.1°C |
| Response Time | 500 ms |
| Emissivity | Adjustable 0.10 ~ 1.0 |
| Display | LCD with backlight |
| Operating Temperature | 0℃ ~ 50℃ |
| Storage Temperature | -20°C to 60°C |
| Material | ABS |
To Next Page