WitGarage GS801C - Page 3

3
5 Test App settings
A. Flip GD801S 90 degrees again to check the state on your app;
B. Repeat the operation above for 3 to 5 times, and check the state on
your app every time.
C. Make sure the state is right after you flip the sensor;
6
Mount WitGarage to garage door opener
A. Close your garage door, stick GD801S on the top of your garage door;
make sure the notch of GD801 is on the bottom.
B. Connect GD801C to your garage door opener;
7
WitGarage system test
A. Launch WitGarage app, control your garage door by app, check the
state on your app and you will receive notifiation;
B. Repeat the operation above for 3 to 5 times, check again.
8
Setup Alexa or Google home
A. Launch the app of Alexa or Google home, add skill
“
smart life
”
;
B. Link WitGarage account and authorize;
C. The voice command like this:
Alexa(ok google),Turn on xxx
Alexa(ok google), Turn off xxx
(xxx is the name of your device, the default name is “WitGarage”)
WITGARAGE