Braking System EBRA20
Operating instruction
1.2 Liability and guarantee
This instruction handbook is written for people
who are familiar with lift servicing and installa-
tion. Sufficient knowledge of lifts is essential.
WITTUR accept no responsibility for damage
caused by improper handling, or for damage
caused as a result of actions other than those stat-
ed in these operating instructions.
The WITTUR guarantee may be voided if parts
other than those described in these instructions
are installed.
Unless stated otherwise, the following are not
per-
missible due to technical safety reasons:
• The use of components other than those
installed
• Carrying out modifications, of any kind on the
brake system
• Installing two different brake heads with dif-
ferent index numbers together
• Destruction of the lead seal
• Combining different component types
• Installing braking systems intended for other
employment than that stipulated
• Carrying out faulty or improper maintenance
or inspection checks
• Using unsuitable accessories, spare parts or
operating material which has neither been re-
leased by the WITTUR Company nor consists of
original WITTUR spare parts
1.3 Safety precautions
WITTUR machine installation or repair engineers
are chiefly responsible for the safe operation of
machinery.
It is essential to comply with and keep abreast of
all safety rules and legal obligations in order to
avoid personal / product damage during installa-
tion, maintenance and repair work.
Important safety advice and danger warnings are
emphasized with the following symbols:
General danger warning
High danger risk warning (i.e. crushing
edge, cutting edge etc.).
Risk of damage to machinery parts (i.e. due
to incorrect installation, or such like).
Important information sign
These operating instructions belong with the
whole installation and must be kept in a safe place
at all times (i.e. machine room).
The proper assembly and installation of WITTUR
brake systems requires correspondingly well
trained fitting engineers. The responsibility of
training lies with the company appointed to carry
out the work.
THE LMC LIFTCOMPONENTS MANUFACTURING AND COMMERCE COMPANY
Änderungen vorbehalten! Subject to change without notice!
Blatt/
sheet
D7AJMGB.003
Datum/
date
23.05.2002
Stand/
version
23.05.2002
Geprüft/
approved
WAT/MZE
To Next Page
Loading...