Do you have a question about the WIWACAM MW8 and is the answer not in the manual?
Brand | WIWACAM |
---|---|
Model | MW8 |
Category | Digital Camera |
Language | English |
Check requirements before first-time camera setup, including router band and WiFi password.
Instructions on how to carefully remove the camera lens cover, noting its fragile glass material.
Steps to power on the camera after detaching the lens cover, including LED status indicators.
Guide to finding and installing the WIWACAM mobile application for camera setup.
Step-by-step guide for configuring the camera via the WIWACAM app using QR code scanning.
Alternative setup method for the camera, useful if the primary QR code method fails.
Instructions on how to disable the camera's status indicator LED via the mobile app.
Details on the device's capabilities as a mobile power bank, including capacity and ports.
Information on how the camera operates using its internal battery and its runtime.
Procedure to properly shut down the camera using its dedicated power button.
Guidance on inserting a microSD card into the camera, including compatibility and formatting.
Step-by-step instructions for performing a factory reset on the camera to resolve issues.
Instructions for adding the camera to additional smartphones on the same or different network.
How to view the live video stream from the camera using the WIWACAM mobile application.
Configuration for the camera to record video continuously to the microSD card.
Setting up the camera to record video only when motion or an alarm event is detected.
How to access and view video recordings stored on the microSD card via the app.
Configuration for motion detection, sensitivity, and push notifications for alarm events.
Viewing a list of detected alarm events and associated short video clips within the app.
Important notes regarding playback of recorded video files on computer systems.
Guidance on operating the camera for recording without a WiFi connection.
Troubleshooting steps for common issues encountered during the camera setup process.