full.
Time setting
：
Time will be updated after device connect wifi, please operate on App if no
need the watermark of time.
Pay attention：
①
Please ensure insert TF card, if no card, device can’t be
used( but can be used if under the case of wifi on)
②
Please keep the lens at the distance of 50cm or more in a fully
illuminated environment. This will be correct, the color is natural, the
scenery is clear and the picture is stable.
Connect computer
：
The device can be connected to the computer under the case of power on,
standby and power off, and the device can use be USB flash for the file copy,
paste, delete and format.
Connect the device to USB port of computer, the red light will long bright wh
en the computer identify the device. You can make the data transmission wh
en the red light slow flash with the sign of removable disk.
Note
：
1 After the unit is connected to the computer, if the computer can not
recognize it or the removable disk is not ejected after 30 seconds, reset it
again and again.
2 recommended TF card reader directly to read the video file to
play, and directly through the USB connection to save the machine
built-in memory in the video file, the data may be too large, the
transmission can not keep up, and lead to playback is not smooth
Relevant parameters
item Relevant parameter
Video Format
To Next Page
Loading...