WizeLink WAP-3518 User Manual

WAP-3518 Dual Band Wireless Router
Quick Start Guide
Panel
1
Power LED：
5
WAN Port：
Off
：
No power
Connect a network cable into this port
On(Green Light)
：
Device is ready
to establish WAN connection. When in
Flashing(Orange Light)
：
WPS is
MESH mode, WAN port works as a LAN
processing or enter the reset mode. Port.
2
5G Signal LED：
6
LAN Port:
No light
：
No 5GHz signal.
Connect a network cable into these
Green Light
：
5GHz Wireless system
ports to establish LAN connection.
is ready.
7
Reset Button:
Flashing Green Light
：
Transmitting or
Press and hold the button for 10
receiving data via wireless connection. seconds. When the power indicator is
3
2.4G Signal LED：
flashing orange light, the router will
No Light
：
No 2.4GHz signal.
enter the reset mode, and revert back to
Green Light
：
2.4GHz Wireless system
Factory settings.
is ready.
8
WPS Button:
Flashing Green Light
：
Transmitting or
Pushing this button will initiate automatic
receiving data via wireless connection. pairing.
4
Power (DC IN) Port：
Connect your router to an AC socket with
the power adapter.

WizeLink WAP-3518 Specifications

General

Brand	WizeLink
Model	WAP-3518
Category	Network Router
Language	English

Summary

Router Panel Overview

LED Indicators

Explains the status lights for Power, 5GHz, and 2.4GHz signals.

Ports and Buttons

Details the DC IN, WAN, LAN ports, and the Reset/WPS buttons.

Safety Information

General Safety Precautions

Provides essential safety guidelines for router usage and handling.

Installation

Wired Connection Setup

Step-by-step guide for establishing a wired network connection.

Wireless Connection

Manual Wi-Fi Connection

Instructions for connecting to the network using SSID and password.

WPS Wi-Fi Connection

Guide for pairing devices using the Wi-Fi Protected Setup (WPS) button.

Mobile App Setup

WiFi Connectivity

Steps for connecting a mobile device to the router's WiFi network.

Using the Mobile App

Instructions for logging into and navigating the router setup application.

Web UI Setup

Accessing the Web Interface

How to open and log into the router's web-based configuration utility.

Web UI Configuration

Guide for setting up basic router functions via the web browser.

Easy Mesh Setup

Controller Configuration

Steps to configure the first WAP-3518 as the Mesh network controller.

Agent Configuration

Steps to configure subsequent WAP-3518 units as Mesh network agents.

Easy Mesh Connection

Wireless Mesh Pairing

Instructions for wirelessly connecting Mesh controller and agent devices.

Mounting Instructions

Placement Options

Describes how to place the router vertically or horizontally on a surface.

Wall Hanging Guide

Details screw specifications and the process for wall mounting the router.

Regulatory Compliance

FCC Compliance Statement

Outlines FCC rules, operational conditions, and potential interference.

Radiation Exposure Guidelines

Specifies safe operating distances for human exposure to radio frequency energy.