Need help?Do you have a question about the WLX WXL-H5 and is the answer not in the manual?
General| Brand | WLX |
|---|---|
| Model | WXL-H5 |
| Category | Docking Station |
| Language | English |
Identifies the docking station as WXL-H5, a Multi-function/All in 1 HDD Docking.
Details support for simple backup functions exclusively via the USB port.
Explains the LED indicator's role in showing power and HDD read/write status.
Provides the docking station's physical size (180x110x102mm) and weight (288g).
Lists compatible operating systems, including Windows, macOS, and Linux versions.
Enables tool-free hard disk installation and supports hot-plug functionality.
Ensures compatibility with USB1.1/USB2.0 and SATA I/SATA II interfaces.
States the high-speed USB 2.0 data transmission rate of 480MB/S.
Supports 2.5'/3.5' SATA and 2.5'/3.5' IDE drives, up to 2TB.
Features a one-touch backup function, usable only via the USB port.
LED lights indicate power status and hard disk reading/writing activity.
Lists supported operating systems including Windows, macOS, and Linux.
Instructions for inserting IDE/SATA drives and connecting power and USB cables.
Steps for partitioning and formatting new hard drives via computer management.
Details on activating the one-touch backup (OTB) function.
Advises against plugging/unplugging drives while connected to power for data security.
Mentions that some older IDE drives require master/slave configuration.
States that WD3.5" IDE hard drives are not supported.
Notes that user misuse can damage the product and is not covered by warranty.
To Next Page