EasyManua.ls Logo

WMF KITCHENminis - Grinding and Initial Setup; Grinding Degree Adjustment; First-time Use Procedure

WMF KITCHENminis
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Grinding degree
By turning the bean hopper, you can adjust the desired grinding degree from ne
(level1) to coarse (level 9).
When selecting the grinding degree, we suggest the following settings:
Grinding
degree setting
Use Max. bean
volume
1-2 (ne) Espresso, strainer machines 15 g
3-7 (medium) Filter coffee machines 30 g
8-9 (coarse) Manual brewing 30 g
Set the grinding degree before adding the coffee beans, as otherwise beans stuck
in the grinding mechanism may prevent the motor from working.
Important: If you have already added the beans, only change the grinding degree
when the grinding mechanism is operating.
During grinding, the setting can be changed at any time when the motor is
running.
Before using for the rst time
Clean and dry the hopper and collection container carefully before using for
the rst time. Follow the instructions in the “Cleaning and care” section.
Insert the collection container into the appliance from below. Gently turn in a
clockwise direction until the collection container locks into place.
Make sure that the screw-top opening is closed.
Select the desired grinding degree by turning the grinding setting.
Open the hopper by turning the casing to the
position and remove the casing from above.
Pour the beans into the hopper and close by replacing the casing. Turn the
casing to the
position.
Please note: The coffee grinder is only suitable for grinding coffee and
espresso beans. The use of other grinding material, such as poppy seeds, nuts,
sugar etc. is improper use and will void the warranty.
Connect the power cable to the appliance and plug in. Press the Start / Stop
button to start the grinding process.
Once the desired quantity of beans has been ground, switch off the appliance
by pressing the Start / Stop button.
Note: You can stop interrupt the grinding process at any time by pressing the
Start / Stop button.
You can remove the coffee grounds through the screw-top opening of the
collection container.
Note: In order to avoid aroma loss, only grind coffee for immediate use.

Related product manuals