24 25
• Have the mower’s package nearby.
• Be sure to cut your grass with your old mower one last time
before you start wiring. This will make inserting pegs easier and
help ensure that the mower doesn’t cut the wire.
WHAT
YOU’LL
NEED
• Hammer
• Small, flat & Phillips screwdrivers
• Combination pliers
Lay the perimeter wire (“virtual boundary”), which
defines the working area for the mower.
Lay
the Wire
TIPS
Soft Obstacles
Soft obstacles are flower beds,
ponds or small trees. They need to
be protected by creating Perimeter
Islands.
OBSTACLES
Now you’re ready to install the Perimeter Wire.
Let’s take it step by step.
... A sunny day and a sunny mood
:
)
First things first: obstacles and slopes
Before you put a single peg into the ground, take note of any
obstacles or slopes.
To Next Page
Loading...
