62 63
Automatic
operation
• The Area size setting automatically determines the required
mowing time for your lawn - the duration of a “Mowing Cycle”
• The mower usually performs several consecutive mowing
operations until it completes a full Mowing Cycle
• Each mowing operation starts at predetermined times, once
the mower is fully charged
• You can restrict automatic operation at particular times via
the Inactive Time setting
• Once a Mowing Cycle is completed, the mower will stay in
the Base Station until the next cycle begins
• The interval between mowing cycles is defined by the Mowing
Frequency setting
• If required, extra mowing time can be added via the Mowing
Hours setting to improve mowing results.
Learn how to configure automatic operation and manually
bypass/override it when needed.
To Next Page
Loading...
