66 67
If you wish to pause automatic operation in a particular zone
of your lawn, you may do so via the Program On/Off menu.
Pause automatic operation for a specific zone
Press Settings
for 3 seconds.
P001 will be
displayed.
Use the arrows
to scroll
to menu P021.
Press OK.
Use the arrows
to scroll to the
desired zone:
L1 – Main Zone
A1 – Sub-Zone 1
A2 – Sub-Zone 2
A3 – Sub-Zone 3
ALL – Entire lawn
Press OK to select
Toggle between
ON/OFF.
Press OK
to confirm.
When Program is set to Off in a particular zone, the mower will skip the operation in
that zone, but will continue to mow the edge of the entire lawn anyway.
3 second
To Next Page
Loading...
