Wolf 802727 User Manual

Front Panel Kit Model Numbers:
• 802505 – WDFRONT/S –
Classic Stainless Steel
• 802506 – WDFRONT/B –
Carbon Stainless Steel
• 802507 – WDFRONT/P –
Platinum Stainless Steel
• 802727 – WDFRONT/I –
Integrated Front Panel for
Wood Front
Handle Assemblies Available:
(for use with 802727)
• 802781 – Stainless Handle
Assembly
• 802782 – Black Handle Assembly
• 802783 – Platinum Handle
Assembly
Handle assemblies include handle,
stand-offs and mounting screws.
W OLF W ARMING D RAWER F RONT P ANEL K IT
I NSTALLATION I NSTRUCTIONS
IMPORTANT NOTE: Please read
these instructions carefully
before beginning installation.
Parts Included with Front Panel
Assembly:
• Front panel
• Six color coordinated screws for
front panel.
• Handle and standoffs (not included
with 802727).
• Four handle mounting screws
(not included with 802727).
• Four color coordinated trim pieces
(not included with 802727).
• Six color coordinated trim mount-
ing screws (not included with
802727).
29
7
/8"
(75.9)
23"
(58.4)
10
1
/4"
(26.0)
Warming drawer overall dimensions
*
Dimension may vary
by
+
1
/8" (.3 cm)
23
1
/2"
(59.7)
28
1
/2"*
(72.4)
9
1
/4"
(23.5)
10
7
/8"
(27.6)
9
1
/4"
(23.5)
1" min
(2.5)
E
2
3
/8"
(6.0)
2" x 2" anti-tip
block against
rear of cutout
allow for
5
/8" overlap
on all sides
5"
(12.7)
4"
(10.2)
Warming drawer installation specifications
The Wolf Warming Drawer Model
WD30 can be installed above or
below a single wall oven SO30F/S,
SO30U/B, SO30U/P or SO30U/S or
below cooktop CT36E/S, CT36E/B,
CT36E/P, CT36G/S, or CT36G/P.
Please refer to installstion instructions
provided with cooktops for additional
installation information.
The Wolf Warming Drawer can also
be installed next to or above another
Wolf Warming Drawer.
IMPORTANT NOTE: This Front Panel
Kit is designed for and approved only
for use with Wolf Warming Drawer
WD30.
The cabinet or wall opening must be
within the following dimensions:
Height – 9
1
/4"
Width – 28
1
/
2"
Depth – 23
1
/
2"
Refer to the Use and Care Informa-
tion and Installation Instructions
included with Model WD30.

Wolf 802727 Specifications

General

Model Number	802727
Product Type	Warming Drawer
Brand	Wolf
Installation	Built-In
Finish	Stainless Steel