Wolf CT15I - Wolf Induction Cooktops

Wolf Induction Cooktops 3
wolfappliance.com/specs
Induction Cooktop Installation
IMPORTANT NOTE: T
his installation must be completed
by a qualified installer or Wolf authorized service center
technician.
Read this entire installation guide prior to installation and
save for the local inspector’s reference. The homeowner
should keep this installation guide for future reference.
This appliance must be installed in accordance with
National Electrical Codes, as well as all state, municipal
and local codes. The correct voltage, frequency and
amperage must be supplied to the appliance from a dedi-
cated, grounded circuit which is protected by a properly
sized circuit breaker or time delay fuse. The proper
voltage, frequency, and amperage ratings are listed on the
product rating plate.
Record the model and serial numbers before installing the
induction cooktop. Both numbers are listed on the product
rating plate, located on the underside of the cooktop.
Refer to the illustration below.
W
olf Induction Cooktop
Model Number
Serial Number
M
E
L
T
O
F
F
H
I
-
P
O
W
E
R
H
I
G
H
S
I
M
O
F
F
O
N
H
I
-
P
O
W
E
R
H
I
G
H
S
I
M
O
F
F
O
N
M
E
L
T
H
I
G
H
O
F
F
O
N
Location of rating plate.
RATING PLATE