Wolf IM15/S - Multi-Function Cooktop Operation; Initial Start-Up and Break-In

Multi-Function Cooktop Operation 10
To light the burner, push down and turn the control knob
counterclockwise to the HIGH setting. You will hear a
clicking sound and see the burner ignite. Once the burner
is lit, continue turning the knob counter clockwise to any
one of the settings—HIGH through LOW.
Multi-Function Cooktop Operation
INITIAL START-UP
Before using for the rst time, clean your multi-function
cooktop thoroughly with hot water and a mild detergent.
Rinse and dry with a soft cloth. This removes any residual
oil and grease left on the surface from the manufacturing
process. Refer to care recommendations on pages 12–13.
IMPORTANT NOTE: A small amount of smoke and odor
may be noticed during the initial break-in period.