• Power Frequency: 50Hz/60Hz
• Sounds: Shutter, Boot-Up, Beep, Volume
• White Light Balance: Auto, Daylight, Shade, Tungsten Light, White
Fluorescent, Underwater. (By adjusting this setting, the camera can
correct the color of photos taken under different lighting conditions.)
• Effect: Normal, BW, Natural, Negative, Warm, Brightness Contrast
• Distortion Calibration: On/Off. (To adjust for the fish eye effect)
• Date & Time: Set Date and Time for the camera
• Screen Saver: Off, 1min, 3min, 5min. (After a set period of time, if there
is no operation on the camera ,the screen will automatically turn off. At
this point the camera does not turn off, you can press any button to
light up the screen.)
• Auto Power Off: Off, 1Min, 3Min, 5Min. (After a set period of time, If there
is no operation on the camera, the camera will automatically shut down.)
• Power On Auto Record: On/Off (When you open the camera it will
automatically starts to record video.)
• USB: MSDC/PCCAM(UVCMJPG)
• Language: English/Français/Deutsch/Italiano/Espanol/日本語/简体中文
• Format Card: Format the memory card in the camera. Once this operation
is implemented, all data will be deleted
• Factory Reset: Reset all camera settings to default settings
• System Info: Firmware version
• Card Info: Card capacity and remaining memory
7
To Next Page
Loading...