•Power Frequency: 50Hz/60Hz
•Sounds: Shutter, Boot-up, Beep, Volume
• White Balance: Auto, Daylight, Shade, Tungsten Light, White
Fluorescent, Underwater. (By adjusting this setting ,the camera can
correct the color of photos taken under different lighting conditions.)
•Distortion Calibration: On/Off. (To adjust for the fish eye effect)
•Date & Time: Set Date and Time for the camera
•Screen Saver: Off, 1Min, 3Min, 5Min.
(After a set period of time, if there is no operation on the camera, the
screen will automatically go black. At this point the camera does not
turn off, you can press any button to light up the screen.)
•Auto Power Off: Off, 1Min, 3Min, 5Min.
(After a set period of time, If there is no operation on the camera, the
camera will automatically shut down.)
•Language: English/Français/Deutsch/Italiano/Espanol/日本語/简体中
文
•Format Card: Format the memory card in the camera. Once this
operation is implemented, all data will be deleted.
•Factory Reset: Reset all camera settings to default settings
•System Info: Firmware version
•Storage Info: Card capacity and remaining memory
EN
10
To Next Page
Loading...
