5. Connect the red line with Reversing control line
Reversing control lines are usually located at the
rear of the car, although their position may vary, so
be sure to refer to the car's manual, use pliers or a
wire stripper to strip the rubber and expose live
wires.
NOTE:
If you can't install it, please CONTACT US, you can send us a photo of your fuse box, and we
have professional technicians who can help you wire it.
If you turn on the engine (ACC on) while the cigar power adapter is connected,the power
will be turned on automatically and the opening screen will be displayed.
Press and hold the power button to turn off the power during startup,and then briefly press
the power button again to turn on the power of the unit and display the opening screen.
Short press the power button to wake and turn off the screen.
Power ON/OFF
Menu Settings
Home-interface
After turning on the power, the machine will automatically turn on and enter the main interface,
and the camera will start recording at the same time.
26
To Next Page
Loading...
