14
Rear Camera Installation
Notice:
Make the connection first and ensure the machine work well before installing.
Keep away with the driving operation and the active part of the car. Do not get caught by
screws or seat gaps.
When drilling holes in car, please do not break the vibrator, tank and wires.
Before attaching the double-sided tape, please remove stain or oil with alcohol cleaner from
the surface.
When temperature is low, please warm up the mounting surface with dryer, in order to
improve the adhesion before sticking.
The provided 3M sticker cannot be reused, or the adhesion will not be strong enough.
Do not disassemble or change any part of this product, this will not be covered by warranty.
To Next Page
Loading...
