15
We recommend install the rear camera above the license plate.
1. Fix camera with 3M adhesive
Find a best location tear off the 3M adhesive on the rear camera,
fix the rear camera near by the car license plate lamp. (if you need
to adjust the angle, please attach the rear camera bracket to the
rear camera and tighten it with screws first).
2. Remove the Panel
Remove the inner panel of the trunk to expose the rear wiring
compartment of the car. Open the trunk and look for a sturdy
inner panel covering the other side of the license plate installation
area. Then, insert a decorative removal tool or another thin device
behind the panel and pry it apart.
To Next Page
Loading...
