23
2. Once the GPS is installed, the GPS icon on the home screen will show. After the GPS signal
has been received, it will show direction and speed.
Q: Why is my GPS not working? /How to use GPS ?
A: If you cannot receive the signal after inserting the GPS, please follow the steps below.
1. The vehicle must be within a large area.
2. Insert the GPS plug again.
3. Place the GPS plug upward.
4. Restart
5. It will be recognized after about 40 seconds.
6.You can open the "GPS information" function to check the strength of the GPS signal.
To Next Page
Loading...
