Wolfcraft FKS 115 User Manual

wolfcraft
®
GmbH
Wolff-Str. 1
D-56746 Kempenich
Germany
www.wolfcraft.com
FKS 115
l Original-Bedienungsanleitung (9)
t Translation of the original operating instructions (12)
p Traduction de la notice d'utilisation originale (15)
n Traducción del manual de instrucciones original (18)
L Vertaling van de oorspronkelijke handleiding (21)
y Traduzione del manuale d’uso originale (24)
M Tradução do manual original (27)
m Oversættelse af den originale betjeningsvejledning (30)
S Översättning av original bruksanvisningen (33)
q Alkuperäisen käyttöohjeen käännös (36)
K Oversettelse av original bruksanvisning (39)
N Tłumaczenie oryginalnej instrukcji obsługi (42)
v Μετάφραση του πρωτότυπου οδηγιών χρήσης (45)
W Orijinal işletim kılavuzunun çevirisi (48)
k Překlad originálního Návodu na obsluhu (51)
w Az eredeti használati útmutató fordítása (54)
P Traducerea instrucţiunilor de operare originale (57)
e Превод на оригиналното упътване за употреба (60)
x Prevod originalnog uputstva za upotrebu (63)
r Перевод оригинала инструкции
по эксплуатации (66)
6910 000
BDAL 6910.000_116316910 04.04.17 13:42 Seite 1

Wolfcraft FKS 115 Specifications

General

Blade Diameter	115 mm
Power Source	Corded Electric
Voltage	230 V
Frequency	50 Hz
Material	Various (depending on blade)

Summary

Introduction and Safety Information

Intended Use of Guide Bar

Details the specific applications and purpose of the FKS 115 guide bar.

General Safety Precautions

Covers essential safety precautions for operating power tools and maintaining a safe work environment.

Safety Symbol Guide

Explains the meaning of various safety symbols used throughout the manual.

Circular Saw Safety Guidelines

Safe Operation and Back Stroke Prevention

Provides specific safety advice for using circular saws with the guide bar, including preventing kickback.

Scope of Supply and Assembly

Assembly Instructions

Guides the user through the steps of assembling the guide bar components.

Guide Bar Sawing Procedures

Setup, Cutting, and Adjustment

Details how to set up the guide bar, align the saw, perform cuts, and make adjustments.

Product Documentation

Warranty Terms and Conditions

Outlines the terms, duration, and conditions of the product warranty.

Declaration of Product Conformity

States the product's compliance with relevant EU directives and regulations.