Wolfcraft MASTER cut 2500 User Manual

6902
MASTER cut 2500
wolfcraft
®
GmbH
Wolff-Str. 1
D-56746 Kempenich
Germany
www.wolfcraft.com
l Original-Bedienungsanleitung (30)
t Translation of the original operating instructions (42)
p Traduction de la notice d'utilisation originale (53)
n Traducción del manual de instrucciones original (65)
L Vertaling van de oorspronkelijke handleiding (77)
y Traduzione del manuale d’uso originale (89)
M Tradução do manual original (101)
m Oversættelse af den originale betjeningsvejledning (113)
S Översättning av original bruksanvisningen (124)
q Alkuperäisen käyttöohjeen käännös (135)
K Oversettelse av original bruksanvisning (146)
N Tłumaczenie oryginalnej instrukcji obsługi (157)
v Μετάφραση του πρωτότυπου οδηγιών χρήσης (169)
W Orijinal işletim kılavuzunun çevirisi (181)
k Překlad originálního Návodu na obsluhu (192)
w Az eredeti használati útmutató fordítása (203)
P Traducerea instrucţiunilor de operare originale (214)
e Превод на оригиналното упътване за употреба (226)
x Prevod originalnog uputstva za upotrebu (239)
r Перевод оригинала инструкции
по эксплуатации (250)
BDAL 6902_116306902 26.04.17 11:50 Seite 1

Wolfcraft MASTER cut 2500 Specifications

General

Brand	Wolfcraft
Model	MASTER cut 2500
Category	Tool Storage
Language	English

Summary

Introduction to the MASTER cut 2500

Technical Data

Comprehensive specifications of the MASTER cut 2500, including dimensions, worktop, and load capacity.

Symbols and Their Meaning

Explains the meaning of various safety and operational symbols used in the manual.

Assembly Tools

Lists the tools required for assembly, specifying included and not included items.

Intended Use of the MASTER cut 2500

General Safety Instructions

Safety Instructions for Circular Saws

Safety Information for Circular Saw Benches

Safety Instructions for Jigsaws

Safety Information for Mitre Saws

Safety Instructions for Routers

Scope of Delivery and Basic Assembly

Basic Assembly

Step-by-step guide for the initial assembly of the table, including unfolding legs and attaching components.

Mounting the Circular Hand Saw

Stationary Sawing with the Circular Hand Saw

Sawing with the Angle Stop

How to use the angle stop for precise angled cuts with the circular saw.

Sawing with the Parallel Guide

Instructions for using the parallel guide for straight cuts and ensuring workpiece stability.

Vertical Mitre Cuts

Steps for setting up and performing vertical mitre cuts with the circular hand saw.

Sawing with the Guide Bar

Angle Cuts

Specific steps for setting up and making angled cuts using the guide bar and angle guide.

Serial Cuts

Instructions for making repetitive cuts using the serial cut attachment with the guide bar.

Sawing with the Jigsaw

Mounting a Mitre Saw

Adjusting the Machine Plate

Special Accessories for the MASTER cut 2500

Two Extra Attachable Riving Knives

Details on the specific riving knives designed for saws without integrated riving knives.

Intended Use of Riving Knives

Explains the purpose and compatibility of the special riving knife accessories.

Riving Knives Art. No. 6916000 and 6917000

Mounting the Circular Hand Saw Without Riving Knife

Attaching Riving Knives

Aligning the Circular Hand Saw

Cutting Depth Adjustment for Riving Knives

Vertical Mitre Cuts with Riving Knives

Warranty Information

Declaration of Conformity