Wolfcraft MASTER work 1600 - Product Overview and Specifications; Technical Data; Symbols and Their Meaning; Assembly Tools and Intended Use

t
15
INTRODUCTION
• CAUTION! Do read all safety & other instructions that have come with the MASTER work 1600 and with the power tools
you use for work. Failing to observe the safety & other instructions may cause electric shocks, fire and/or severe injuries.
• Do keep the operating instructions for future reference in a safe place.
TECHNICAL DATA
dimensions (put up for use): 1110 x 765 x 863 mm
dimensions (folded up): 1110 x 765 x 200 mm
worktop: 1035 x 695 mm
diameter of the clamping holes: 20 mm
pattern of the clamping holes: 128 / 128 mm (horizontal / vertical)
bore diameter of the slotted holes: 91 x 23 mm
load-bearing capacity: 120 kg
weight: 21 kg
SYMBOLS AND THEIR MEANING
Do not apply weight unevenly.
Maximum load: 120 kg
Do not use as a seat, ladder or support.
Do not stand on the working table.
Fasten stationary devices to the table using bolts!
Do not saw more than 5 mm into the table!
Warning against a general danger
Read the instructions!
Goggles must be worn.
Hearing protection must be worn.
Pull the plug.
General information
Dust mask must be worn.
ASSEMBLY TOOLS
1 Allen key: A/F 2.5
(included in scope of delivery)
INTENDED USE
• The MASTER work 1600 working table is intended for use as a workstation for machining workpieces (e.g. sanding, planing, drilling,
sawing, etc.).
• Workpieces can be clamped securely to the worktop using the clamps available in the wolfcraft range.
• When using mitre saws and the separately available wolfcraft drill stand (art. no. 5027000) on the table, the fasteners supplied must
be used.
• CAUTION! It is only possible to use machines on which the workpiece is processed vertically from top to bottom.
• CAUTION! Machines that apply lateral pressure to the working table should not be mounted.
• Observe the manufacturer’s safety instructions for the machines used, as well as the safety instructions for the working table.
• When disposing of the MASTER work 1600, please observe local disposal regulations.
The user is liable for any damage or accidents resulting from improper use.
1 spanner: A/F 10
(not included in scope of delivery)
BDAL 6909.000_143006909 04.02.20 11:28 Seite 15