Need help?Do you have a question about the WOLSELEY Beermaster Plus BMIEP-448-48 and is the answer not in the manual?
General| Brand | WOLSELEY |
|---|---|
| Model | Beermaster Plus BMIEP-448-48 |
| Category | Air Conditioner |
| Language | English |
Provides definitions for abbreviations and terms used in the manual.
Highlights essential safety information and precautions for handling and installing the equipment.
Outlines crucial checks and conditions to ensure before commencing the installation process.
Details guidelines for optimal placement of the condensing unit for performance and access.
Provides step-by-step instructions and illustrations for accessing the internal components of the condensing unit.
Gives instructions for locating and positioning the evaporator unit, including clearance requirements.
Guides on securely mounting the condensing unit using wall brackets, detailing spacing and fixings.
Provides instructions for wall-mounting the evaporator unit, including bracket spacing and fixing methods.
Explains how to use tables to select appropriate pipe sizes based on equivalent run length and cellar temperature.
Provides guidance on selecting appropriate cable sizes according to IET regulations for electrical connections.
Details how to properly connect and terminate electrical cables for both single-phase and three-phase units.
Lists essential checks to perform before operating the units after installation and charging.
Explains how to verify and correct the compressor's rotational direction for three-phase units.
Describes the operation and adjustment of the BMOP fan speed controller based on condensing pressure.
Explains the low-pressure cut-out and cut-in settings for compressor protection.
Describes the high-pressure trip setting and automatic reset for compressor protection.
Describes the EC fan set for the BMOP unit and its control via the fan speed controller.
Details the BMIEP controller's setpoint range, LEDs, and anti-cycle timer for compressor protection.
Guides on how to adjust the temperature set point using the controller's buttons.
Explains the different modes of operation for the controller and its display.
Outlines the conditions and procedures for enabling and managing the defrost function, including sensor requirements.
Explains how to enable or disable the energy-saving mode for the evaporator, affecting fan operation.
Specifies routine maintenance tasks for the condenser coil, such as cleaning, to ensure efficient operation.
Lists annual maintenance checks, including security of fixings, pipeline inspection, and motor checks.
Describes cleaning procedures for evaporator and condenser fins, advising against high-pressure washing.
Presents sound pressure levels and air volumes for BMOP condensing units under different temperature conditions.
Dimensional outlines and connection details for BMOP130 to BMOP250 condensing units.
Dimensional outlines and connection details for BMOP320, BMOP350, and BMOP360 condensing units.
Dimensional outlines and connection details for BMIEP-37 and BMIEP-48 evaporator units.
Dimensional outlines and connection details for BMIEP-69 and BMIEP-89 evaporator units.
Dimensional outlines and connection details for the BMIEP-133 evaporator unit.
Provides electrical specifications including full load current, LRA, fuse/MCB sizes, and minimum cable sizes for BMOP units.
Details electrical data for BMIEP units, including fan motor and heater specifications, and fuse/MCB ratings.
Provides contact information for technical support, sales, and spare parts for the product range.
To Next Page