Page 4
www.wolverineairsoft.com
Getting Started
The Wolverine Airsoft STORM OnTank and
STORM InGRIP regulators are intended for use
with standard pressure or low pressure paintball
HPA tanks. The InGrip regulator can also be used
with standard CO2 tanks. Pressure is adjusted
by turning the set screw on the front of the reg-
ulator using the included 3/32” hex key.
Specifications
Pressure adjustment Range: 40-140 PSIG
(60-180 PSIG for HighPressure)
Input Pressure Range: 300-1000 PSIG
Pressure Adjustment Rate: ~15 PSI/Turn
Recommended Service Time: 100,000 shots or every
6 months
OnTank HighPressure InGrip
Pressure adjustment screw
Tournament
Lock
To Next Page
Loading...
