Assemble back-
rest roller
Assemble back-
rest cover
As indicated in the following pictures, assemble
the back-rest roller onto the back-rest.
Before assembly please check the location of
the front cover and the rear cover.
Sponge shape
Identification of back-rest cover
Back-rest cover (front)
Back-rest cover (rear)
Place the rear cover
behind the back-rest.
Assembled back-rest and
back-rest cover.
Assemble the foot
sponge & tube plug as shown
in the above picture.
Make sure the back-rest
rollers on both sides clamped
until a “click” is heard.
Assemble
correctly
Assemble
correctly
The back page has the guide for the assembly of the rowing part.
Wonder Core2 Quick Assembly
Before use, please read this Guide for quick assembly!
To Next Page
Loading...
