Pair more light switches
1. Either press Add another device in the Success screen (A), or the + on the Devices
screen (B), then select Light switch from the Device Selection list (C).
2. Remove the front cover of the light switch to locate the functional button (D). Press
Next on the app. Use pin to press and hold the button for about 20 seconds until
all three LEDs flash. Release the functional button and press Next on the app.
3. Now, press the displayed location name (E) to show list of existing locations
(scroll down if necessary). Press the one you require to select it. Alternatively,
press Create new location to specify new location. Press Next.
4. Type in name for the light switch and press Save.
5. Press Select socket state (F) and choose the option from the list that best
describes how the light switch is wired. The selected socket state will display on
the screen. Press Next.
6. Finally press Finish on the Success screen to end the installation, or press Add
another device to continue pairing more devices.
27
To Next Page
Loading...