Programming
This section describes how to change the default settings in the thermostat.
Thermostat: programming mode
1. Press the MODE button on the front of the thermostat (D) until OFF is displayed on
the screen.
2. Press and hold the space between the HOLD and FAN buttons and at the same
time, swipe finger down the right-hand slider. The display will change to 01 to
indicate you are in programming mode.
3. Press HOLD, then the
or icons until the display shows the required option
(see table), then press HOLD again to save the new setting.
4. Press MODE to return to normal operation.
57
To Next Page
Loading...