Programming (continued)
Menu ID Description (defaults in bold)
01 Temperature display: 00 Celcius; 01 Fahrenheit
02 Heat system type: 00 Non-heat pump; 01 Heat pump
03 Heat source: 00 Electric; 01 Gas / oil / fuel
04 Temperature calibration: ± 2.5°C; ± 4.5°F
05 Set minimum heat point: Default 44°F; 7°C
06 Set maximum heat point: Default 86°F; 30°C
07 Set minimum cool point: Default 44°F; 7°C
08 Set maximum cool point: Default 86°F; 30°C
09 Set minimum deadband: Default 1.8°F; 1.0°C
10 Sequence of operation:
00: cool only
01: cool w/reheat
02: heat only
03: heat w/reheat
04: full auto
05: full auto w/reheat
58
To Next Page
Loading...