Cutting lengths
A. 8 guides from 3mm, 6mm, 9mm, 12mm,15mm
B. 5 lengths setting from 0.8mm to 2.0mm
1. Decide cutting length
2. Select the right guide combs
3. Adjust cutting length setting from 0.8mm to 2.0mm
Remove the butted positions with hands
on its both sides and then remove the
Limit comb installation
Like the picture, hold both sides and
bush when butt: the button positions
Nnotes: the comb should noit be loose
or easy to fal l bff after being butted
L imit comb dismantle
comb
The unlock key needs to be pressed
Moving the button up and down to adiust
the blade(0.8mm-2.0mm)
while adjusting
4
3mm
3mm
6mm
9mm
12mm
6mm
9mm
12mm
L
Thin
R
15mm
15mm
Right guard
Left guard
Thin guard
1
.
4
2
.0
To Next Page
Loading...
