Woodard 1172-BXU - User Manual

Uptown 72"x 42" Boat Shaped Mesh Dining Table
1172-BXU
Assembly Instructions
Parts List:
A. 1 Table Top F. 20 Washers
B. 4 Legs G. 4 Nuts
C. 2 Support bars H. 20 Bolt Covers
D. 1 Bracket I. 1 Hex Wrench
E. 16 Bolts J. 1 Hex Wrench
Step 1:
Remove all protective packing materials and assemble all parts on a flat
surface.
Step 2:
Identify all parts packed in carton against attached parts list.
Step 3:
Assemble all of the following parts together as shown in picture below:
Table Top(A),Leg(B),Support Bars(C) etc.. If needed, turn furniture upside
down to facilitate assembly. Make sure all parts are aligned properly
before tightening any bolts and nuts.
Step 4:
Tighten any bolts and nuts by using hex wrench (J) included in parts
bag. Cover bolts with bolt covers and nuts with nut covers. Be sure
bolts and nuts are tightened securely and aligned. It is user’s
responsibility to make sure all parts are assembled and tightened
correctly and securely.
1 of 2

Summary

Parts Identification

Parts List

Textual list of all components required for the assembly of the dining table.

Assembly Instructions

Preparation and Part Verification

Remove protective materials and confirm all parts are present before beginning assembly.

Main Assembly Steps

Assemble the table top, legs, and support bars as indicated in the diagrams.

Final Tightening and Securing

Use the provided hex wrench to securely tighten all bolts and nuts.

Diagram and Part Details

Component Diagram and Quantities

Visual breakdown of all parts with reference labels, images, and quantities.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Assembly Process
5. Maintenance Features
6. Customer Support

This document provides assembly instructions for the Woodard Uptown 72"x 42" Boat Shaped Mesh Dining Table, model 1172-BXU. This is an outdoor dining table designed for residential or commercial use, featuring a boat-shaped mesh tabletop and a sturdy frame.

Function Description

The Woodard Uptown dining table is designed to provide a durable and stylish surface for outdoor dining and social gatherings. Its boat-shaped design offers a unique aesthetic, while the mesh construction ensures weather resistance and ease of maintenance. The table is intended to be assembled by the user following the provided step-by-step instructions.

Important Technical Specifications

• Model: 1172-BXU
• Dimensions: 72 inches (length) x 42 inches (width)
• Shape: Boat Shaped
• Tabletop Material: Mesh
• Manufacturer: Woodard (Lyon-Shaw)
• Parts List:
  • A: 1 Table Top
  • B: 4 Legs
  • C: 2 Support bars
  • D: 1 Bracket (referred to as "Center Ring" in the diagram)
  • E: 16 Bolts
  • F: 20 Washers
  • G: 4 Nuts
  • H: 20 Bolt Covers
  • I: 1 Hex Wrench (for bolts)
  • J: 1 Hex Wrench (for nuts, though the diagram shows two identical hex wrenches, one labeled I and one J, both for hex head fasteners)

Usage Features

The table is designed for outdoor use, likely in patios, decks, or garden areas. Its mesh tabletop is ideal for outdoor environments as it allows water to drain through, preventing pooling and reducing the risk of rust or mildew. The sturdy construction, once properly assembled, ensures stability and durability for everyday use. The inclusion of bolt and nut covers (H) suggests an aesthetic finish and potentially some protection against the elements for the fasteners.

Assembly Process:

The assembly process is broken down into four clear steps:

1. Preparation: Remove all protective packing materials and lay out all parts on a flat surface to prevent damage and ensure easy access.
2. Part Identification: Verify all parts against the provided parts list and diagram to ensure everything is present and correctly identified. The diagram provides visual representations of each part, including the table top, legs, support bars, center ring (bracket), bolts, washers, nuts, bolt covers, and hex wrenches.
3. Initial Assembly: Assemble the main structural components: Table Top (A), Legs (B), Support Bars (C), and Bracket/Center Ring (D). The instructions suggest turning the furniture upside down if needed to facilitate assembly, indicating that the underside of the tabletop is the primary access point for attaching the legs and support structure. Crucially, all parts must be aligned properly before tightening any bolts and nuts. This step is vital to ensure the table is square and stable.
   • Diagram Details: Photo 1 illustrates the attachment of the legs (B) to the tabletop (A) using bolts (E), washers (F), and nuts (G). The support bars (C) connect between the legs. The center ring (D) is shown connecting to the legs and support bars, likely providing additional stability.
   • Fastener Placement: Bolts (E) are inserted through the tabletop and into the legs/support bars, secured with washers (F) and nuts (G). The diagram also shows the use of hex wrenches (I, J) for tightening.
4. Final Tightening and Finishing:
   • Tighten all bolts and nuts securely using the provided hex wrench(es) (I, J). The instructions emphasize the importance of secure tightening for the table's stability and safety.
   • Cover all exposed bolts and nuts with the provided bolt covers (H) and nut covers. This step enhances the aesthetic appeal of the table and may offer some protection to the fasteners from environmental exposure.
   • The user is explicitly made responsible for ensuring that all parts are assembled and tightened correctly and securely, highlighting the importance of following the instructions carefully for safety and product longevity.

Maintenance Features

While specific maintenance instructions are not detailed in this assembly guide, the design elements suggest ease of care:

• Mesh Tabletop: The mesh design inherently reduces the need for extensive cleaning as it prevents water accumulation. Regular wiping with a damp cloth is likely sufficient for general cleaning.
• Durable Construction: Woodard is known for manufacturing durable outdoor furniture, implying that the materials used are designed to withstand various weather conditions.
• Bolt/Nut Covers: These covers not only improve aesthetics but also offer a degree of protection to the fasteners, potentially extending their lifespan by shielding them from direct exposure to moisture and UV rays, which can cause rust or degradation over time.

Customer Support:

Woodard provides customer service for assistance with the product.

• Hours: Monday to Friday, 8:00 am - 5:00 pm CST
• Phone: (800) 877-2290
• Fax: (800) 733-4257

This comprehensive guide ensures that users can successfully assemble their Woodard Uptown dining table, preparing it for years of outdoor enjoyment.

Woodard 1172-BXU Specifications