To Next PageTo Next PageWhat to do if the Woodbridge Toilets remote control fails?
If the remote control fails, you can operate the Woodbridge Toilets via the knob on the main unit. Also, remember to turn on the power and water supply when using the unit again.
How to discharge water from Woodbridge Toilets?
To discharge water from Woodbridge Toilets: first, activate flushing, and then turn off the angle valve to stop the water supply. Next, unplug the unit and cut off the electricity. Finally, disconnect the hose from the angle valve, drain the water, and then reconnect the hose.
What to do if Woodbridge Toilets experience power and water failure?
In the event of a power and water failure with Woodbridge Toilets, put around 2.1 gallons (8 liters) of water into a barrel and flush the ceramic bowl. It is also highly recommended to drain the water to prevent freezing.
General| Brand | Woodbridge |
|---|---|
| Model | EBT700 |
| Category | Remote Control |
| Language | English |
Step-by-step guide for mounting the remote control bracket using screws and anchors.
Instructions for installing the remote control rack using adhesive tape and gasket.
Visual guide identifying all buttons and their functions on the remote control.
Explains how to use the rear and front cleaning/massage functions and pulse mode.
Details on using the drying function, including automatic stop conditions.
How to adjust the water volume for cleaning functions using '+' and '-' buttons.
Guide to adjusting the nozzle position using '^' and 'V' buttons across 5 levels.
Instructions for activating and deactivating energy saving mode.
Details on the automatic cleaning and drying functions, including custom settings.
How to adjust water, dryer, and seat temperatures across different levels.
How to turn on/off the night light and use its intelligent mode.
Guide to performing half flush, full flush, and auto flush functions.
Instructions for opening/closing the lid and seat automatically.
How to adjust the flush volume for full and half flushes.
Covers user code setting, quiet mode, deodorization, sterilization, and more.
