Woodhaven 8660 User Manual

8660
SOSS 100 Hinge Jig
Owners Manual
Please Read Carefully!
ASSEMBLY
 Insertthetwo1/4-20x3/4"flatheadscrews(MF010)
thruthelargercountersunkholesintheSOSSHingeJig
(8660B).Starta1/4-20ovalnut(5760B - flat side first) onthe
endofeachscrew.Slidethe12"DoubleTrack(4012)onto
theovalnutsandinthegrooveintheundersideoftheHinge
Jiguntilcenteredend-to-end,thentightenthescrews.

Insertthetwo10-24x5/16"
flatheadscrews(MF001)thruthe
remainingtwocountersunkholes
intheHingeJigandstarta10-24
ovalnut(5750B - raised side first)
ontheendofeachscrew.

 Slidea2-7/8"OneTrack(8660T)ontoeachoval
nutandintothegroovesintheundersideoftheHingeJig
untilcoveringtheovalnut,thentighteneachscrew.
BEFORE BEGINNING
 Identifyandverifythatyouhaveallthepartslisted.
Readthrutheinstructionsatleastonce,familiarizing
yourselfwiththepartsandtheirusebeforeproceeding.You'll
needa#2&#3Phillipsscrewdriverforassembly.
 The8660 SOSS Hinge Jigisdesignedtoworkwitha5/8"
bushing&locknut(our PN 5030K)anda3/8"upcutspiralbit(our PN
15406).Ifyouhaveyourown3/4"bushing,makesurethenoseisn't
over3/8"long.You'llneedaplungeroutertocutthehingemortises.
Thequalityoftheplungemechanismcaneffectthesizeofthemortise,
resultinginapoorfitiftheplungemechanismhasexcessiveslop.
MF010 x2
5760B x2
5750B x2
MF001 x2
8660 Hinge Jig for
SOSS 100 Hinge
4008
8660T x2
Parts List:
Please identify and verify that you have all of the parts
listed below prior to assembly.
Part Description . . . . . . . . . . . Quantity
8660B Hinge Jig for SOSS 100. . . . . . . . . . . . . . . . . . . 1
4008 8” Double Track. . . . . . . . . . . . . . . . . . . . . . . . . 1
MF010 1/4-20 x 3/4" flat head screw . . . . . . . . . . . . . 2
5760B 1/4-20 oval nut . . . . . . . . . . . . . . . . . . . . . . . . . 2
8660T 2-7/8" One Track . . . . . . . . . . . . . . . . . . . . . . . . 2
MF001 10-24 x 5/16” flat head screw. . . . . . . . . . . . . 2
5750B 10-24 oval nut . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Woodhaven 8660 Specifications

General

Brand	Woodhaven
Model	8660
Category	Door Opening System
Language	English

Summary

Before Beginning

Parts List Verification

Verify all included parts against the list before commencing assembly.

Hinge Jig Assembly Instructions

Step-by-step guide for assembling the 8660 SOSS Hinge Jig components.

Usage

Cutting Long/Shallow Mortise

Procedure to cut the long/shallow mortise for the SOSS hinge mounting flange.

Cutting Short/Deep Mortise

Cutting Short/Deep Mortise Instructions

Instructions for cutting the short/deep mortise, setting plunge depth and depth of cut.

Accessories

Optional Accessories

Details on optional accessories like Flip Stops and Self-Centering Drills for enhanced use.