Woodpecker WT-1 User Manual

• T

  Tonya NielsenAug 10, 2025

  What to do if Woodpecker WT-1 displays 'Lo' when measuring body temperature?

  

  Same questionReply

  • P

    Patricia RiceAug 10, 2025

    If your Woodpecker Thermometer displays 'Lo' during body temperature measurement, several factors could be the cause. First, ensure that the forehead is free of any obstructions like hair or sweat. Also, make sure that no cold air is blowing directly onto the forehead. If a cold compress has just been applied, wait for 10 minutes before measuring. Finally, ensure that you are holding the thermometer at the recommended measurement distance of 3-5cm.

    

    Reply

Woodpecker WT-1 Specifications

General

Type	Infrared Thermometer
Measuring Range	-50°C to 550°C (-58°F to 1022°F)
Accuracy	±1.5°C or ±1.5% (whichever is greater)
Response Time	500ms
Power Supply	9V battery
Measurement Range	-50°C to 550°C (-58°F to 1022°F)
Distance to Spot Ratio	12:1
Display Resolution	0.1°C or 0.1°F
Automatic Shut-off	Yes
Resolution	0.1°C or 0.1°F
Battery Type	9V