14
EC – Declaration of Incorporation
As defined by the EC Machinery Directive 2006/42/EC
Manufacturer Woods Air Movement
Axial Way
Colchester CO4 5ZD, GB
Herewith we declare that the incomplete machine:
Designation of the machine Model or Type of machine Since year of manufacture
Wood Plate Fan (AC) PFA… 2021
Woods Plate Fan (EC) PFE… 2021
Along with motor type:
• Induction internal or external rotor motor
• Electronically commuted internal or external rotor motor
meets the basic requirements in Appendix I, Articles 1.1.2, 1.1.5, 1.4.1, 1.5.1 of the guidelines in EC Machine
Directive (2006/42/EC).
The following harmonized standards are applied:
EN 60204-1/A1:2009 EN 12100:2010 EN ISO 13857:2008
The specific technical documentation in accordance with Appendix VII B has been written and is available in its
entirety.
The specific documentation will be transmitted to the official authorities on justified request through electronic
means, on data carriers or on paper.
The commissioning of the incomplete machine is prohibited until the incomplete machine has been installed in a
machine which then meets the requirements of the EC Machine Directive 2006/42/EC.
Name of the representative for documentation:
Address of the nominated person: see manufacturers address
EC-Declaration of incorporation was issued:
Colchester, 16-Feb-21
Place, Date Simon Chapman
R&D Director Woods Air Movement
11.2 Declaration of Incorporation
These products fall under the terms of an incomplete machine. For this reason, the following Declaration of
Incorporation has been prepared. The Declaration of Incorporation applies only to products mentioned in this manual.
To Next Page
Loading...
