Woods BACKHOE 1050 - Page 50

50 Parts
51861 (Rev. 6/16/2006)
BH1050 STABILIZER CYLINDER
REF
“E”
PART
“P”
PART
QTY DESCRIPTION
1 34218 34218 1 2-1/2 x 15 Hydraulic cylinder assembly
2 1972 * 1972 * 2 1/4 - 28 Tapered thread grease fitting
3 34330 N/A 1 Retaining ring, internal 2-1/2 x 15
4 N/A N/A 1 Wire retainer, 1/2 x 15
5 64874 34328 1 Hex lock nut
6 34254 34325 1 Piston
7 34256 34326 1 Gland
8 34257 34257 1 Rod assembly
9 34255 34255 1 Seal kit (contains item 9A-9G)
9A ----- † ----- † 1 O-Ring, 2-1/16 ID x 2-1/4 OD
9B ----- † ----- † 1 Piston ring, 2-1/2
9C ----- † ----- † 1 O-Ring, 2-1/8 ID x 2-1/2 OD
9D ----- † ----- † 1 Back-up ring, 2-1/8 ID x 2-1/2 OD
9E ----- † ----- † 1 Poly seal, 1-1/2 x 1-7/8 x 5/16 deep
9F ----- † ----- † 1 Wiper ring, 1-1/2
9G ----- † ----- † 1 O-Ring, 3/4 ID x 7/8 OD
10 ----- ----- 1 Cylinder barrel assembly
* Obtain locally
† Included in seal kit