PN-52886 (4/97)6
SAFETY RULES
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
(Safety Rules continued from previous page)
! Tighten all bolts, nuts and screws to torque
chart specifications. Check that all cotter pins are
installed securely to ensure equipment is in a safe
condition before operating.
! Make sure all safety decals are installed.
Replaceifdamaged.(SeeSafetyDecalssectionfor
location.)
! Make sure shields and guards are properly
installed and in good condition. Replace if dam-
aged.
! Wear gloves when installing belt. Be careful to
prevent fingers from being caught between belt
and pulley.
! Use care when installing or removing belt from
spring-loade d idler. Springs store energy when
extended and, if released suddenly, can cause
personal injury.
STORAGE
! Block equipment securely for storage.
! Keep children and bystanders away from
storage area.
NOTES
(Rev. 4/12/01)
To Next Page
Loading...
