14 Operation
MAN1249 (2/28/2018)
Figure 8. Tiller Depth Adjustment
NOTE: Tillage depth is dependent on ground hard-
ness, tractor speed, skid shoe setting, and tractor
hitch adjustment. Multiple passes may be neces-
sary to achieve tillage depth.
TILLER OFFSET
The RT tillers come with a fixed gearbox offset, so that
the tiller can cover a tractor width larger than its width.
The offset is to the right as sitting in the tractor seat. By
tilling in a clockwise rotation, tire tracks can be reduced
or eliminated. Below is a chart which outlines the trac-
tor width that can be paired with a tiller.
Figure 9. Tiller Offset Chart
Figure 10. Tiller Offset
Figure 11. Clockwise Direction
Hole
First Pass
Depth
1 0.0mm (0”)
2 25.4mm (1”)
3 50.8mm (2”)
4 76.2mm (3”)
5 101.6mm (4”)
Tiller Model Offset Tractor Width
RT42.30
76.2mm (3”) 1.22m (48”)
RT48.30
76.2mm (3”) 1.37m (54”)
RT60.40
58.4mm (2.25”) 1.64m (64.5”)
RT72.40
58.4mm (2.25”) 1.94m (76.5”)
To Next Page
Loading...
