To Next PageTo Next Page
Need help?Do you have a question about the Woodstar bs 52 Series and is the answer not in the manual?
Advice on reading instructions, learning the machine, and using it safely.
Instructions for securely attaching the machine to a workbench or stable support.
Instructions for assembling the moulding fence components before mounting.
Installing the safety fence to prevent kickback during operation.
Adjusting the spindle height for cutter depth, controlling the cutting tool's position.
Adjusting the spindle speed through 6 stages for optimal cutting results.
Instructions for upkeep, cleaning, and care of the machine.
Identifies likely causes for the machine not starting and troubleshooting steps.
Selecting and installing correct clamping sleeves for the spindle.
Instructions for connecting the machine's electrical equipment and required qualifications.
General