Woodstock D2796 - User Manual

COPYRIGHT © BY WOODSTOCK INTERNATIONAL, INC. TX 4-085-998
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
REPRINTED APRIL 2001, PRINTED IN CHINA
DOVETAIL JIG
D2796 OPERATING MANUAL
P.O. Box 2309
Bellingham, WA 98227

Summary

Safety Rules for All Tools

Assembly

Preparation

Adjustments

Adjustment Locations

Clamp Adjusting

Procedure for correctly setting the clamping pressure for secure workpiece holding.

Side Stop Set Up

Steps to position and secure side stops for accurate workpiece alignment.

Template Adjustment

Guidance on adjusting the template position for precise joint fit.

Fence Adjustment

Steps for setting the fence position to control router cut depth.

Operations

Half-Blind Joints

Detailed steps for cutting half-blind dovetail joints using the jig.

Trouble Shooting

Tear-Out

Excessive Fit

Incomplete Fit

Offset Edges

Fit Too Tight or Too Loose

Uneven Fit

Woodstock D2796 Specifications

General

Brand	Woodstock
Model	D2796
Category	Tools
Language	English