To Next PageTo Next Page
Need help?Do you have a question about the Woodstock Shop Fox W1830 and is the answer not in the manual?
General| Power | 1/8 HP |
|---|---|
| Voltage | 120V |
| Filtration | 1 Micron |
| Speeds | 3 |
| Motor | Single-phase |
Provides contact information for technical assistance and troubleshooting for the machine.
Details the physical size and weight of the air filter unit.
Lists the dimensions and weight of the packaged air filter for shipping.
Specifies motor type, horsepower, phase, amps, speed, and bearings.
Covers dust collector type, filter, airflow capacity, and filtration rating.
Details the type and size of the impeller used in the unit.
Outlines the materials used for the frame, impeller, and housing.
Identifies key parts like the control panel, remote, and filters with visual aids.
General safety guidelines for operating machinery to prevent injuries.
Specific safety precautions for using air filters, including intended use and hazards.
Details the necessary power supply circuit size and type for safe operation.
Explains the importance and procedure for grounding the machine to prevent shock.
Guidelines for selecting and using extension cords with the air filter.
Critical safety warnings and guidelines for electrical work on the machine.
Visual representation of the machine's electrical connections and components.
Instructions for unboxing the unit and checking all included components.
Step-by-step guide for connecting the machine to a power source.
Steps to perform a test run to ensure the machine operates correctly.
Guidance on selecting the optimal location for effective air circulation.
Instructions on how to properly hang the air filter unit from the ceiling.
Covers turning the unit on/off, changing speeds, and setting the timer.
Explains how the filter performs and how to calculate shop air recirculation.
Lists available accessory filters and related equipment for the air filter.
Procedures and safety for cleaning the air filter components.
Covers common adjustments and procedures for machine service.
Steps and precautions for replacing the fuse on the control panel.
Guide to replacing the batteries in the remote control unit.
Solutions for issues like machine not starting or noisy operation.
List of part numbers and descriptions for the unit's cabinet and remote.
Identifies components and part numbers for the control panel assembly.
Details parts related to the motor and impeller, including their numbers.
Shows the location and type of safety and identification labels on the unit.
Form for customers to register their product and provide feedback.
