Need help?Do you have a question about the Woodward CPC-II and is the answer not in the manual?
General| Ingress Protection | IP20 |
|---|---|
| Protocols | Modbus RTU, Modbus TCP |
| Operating Voltage | 24 VDC |
| Operating Temperature | -40 to +85 °C (-40 to +185 °F) |
| Storage Temperature | -40 to +85 °C (-40 to +185 °F) |
Observe precautions to prevent damage to static-sensitive electronic parts.
Definitions and abbreviations used in the manual for CPC-DX and CPC-II units.
List of related Woodward manuals and publications for reference.
Required software tools for CPC-II unit operations and configuration.
Tools and materials needed for CPC-II unit replacement procedure.
Overview of the CPC-DX assembly and its components.
Steps to prepare the system before replacing the CPC-II unit.
Procedure for safely removing the CPC-II unit from the CPC-DX skid.
Steps for disconnecting and removing electrical wires from the failed CPC-II unit.
Steps for installing the new CPC-II unit hardware onto the skid.
Procedure for loading software settings onto the new CPC-II unit.
Information required when ordering replacement parts for controls.
Description of various engineering services offered by Woodward.
How to contact Woodward for support and service facilities.
Information needed when contacting technical assistance.
To Next Page
