Need help?Do you have a question about the Woodward IKD 1 and is the answer not in the manual?
General| Brand | Woodward |
|---|---|
| Model | IKD 1 |
| Category | Computer Hardware |
| Language | English |
Overview of the IKD 1 digital expansion card and its use with control units.
Guidelines for handling electronic components to prevent static discharge damage.
Details on the voltage requirements and connection for the power supply.
Configuration and connection of 8 discrete inputs with positive or negative logic.
Details on the 8 relay outputs, including their function and connection.
Information on the unit's interfaces, including CAN bus and direct configuration.
Details on CAN bus communication, including problems, length, and shielding.
Information on the direct configuration cable and its use for unit configuration.
Describes the IKD 1 as an expansion board with 8 discrete inputs and 8 relay outputs.
Explains how the IKD 1 interfaces with higher-level control units or PLCs.
Details on communication via the CAN bus and identifier configuration.
Format and details of data cyclically transmitted via the CAN bus.
Format of received data and start/stop commands for CAN bus transmission.
Parameters for configuring discrete inputs, including action type and alarm class.
Parameters for configuring relay outputs, including action type and base status.
Methods for configuring the unit via a plug or the CAN bus.
Description of the LEDs on the PCB and their status indications.
Details on the unit's interfaces: Direct Configuration (DPC) and CAN bus.
Information on software version and software number for identification.
Configurable parameters for CAN bus communication, including Node ID and baud rate.
Configuration of CAN error delay and self-acknowledgment for fault handling.
Detailed parameters for configuring discrete inputs like function, delays, and alarm class.
Detailed parameters for configuring relay outputs, including function, CAN alarm, and base status.
Procedures for commissioning the unit, including safety and configuration steps.
Available factory options for servicing Woodward equipment.
Procedures and information required when returning equipment for repair.
Contact information for Woodward GmbH and international facilities.
Details on after-sales support services like technical support and training.
Information required when calling for technical assistance.
To Next Page