Woodway 4Front Programming Procedure

1
4Front TV Programming Procedure
To access the LCD programming options begin by turning on the TV. With the TV on, be sure that the TV input is
selected. If not, press the “INPUT” key until you see the input selection box. Use “CH+” or “CH-“ to navigate up
and down and select the TV input. Pressing the “ENTER” key will confirm the selection.
With the TV in the correct input mode, press and hold the “ENTER” key for 3 to 5 seconds. Release the “ENTER”
key and press the “BACK” button. This should pop open the TV menu screen. Release the button when the
menu appears.

Woodway 4Front Specifications

General

Running Surface	22" x 68" (55 cm x 173 cm)
Display	Touchscreen
User Capacity	400 lbs
Slat Belt	Yes
Speed Range	0 - 12.5 mph
Incline Range	0% - 15%
Programs	Multiple built-in programs
Motor	None (self-powered)