Supplied By www.heating spares.co Tel. 0161 620 6677
9
Servicing
To ensure continued efficient operation of the appliance it is recommended that it is
checked and serviced as necessary at regular intervals.
The frequency of servicing will depend upon the particular installation conditions and
usage but in general once a year should be adequate.
It is the law that any service work be carried out by a competent person such as British
Gas or other Corgi registered personnel.
The casing should be wiped clean using a damp cloth
Do not use abrasive or corrosive cleaners
Fig. 4
Safety Cut-Out
If the appliance does not light, open flap next to control
panel.
If warning lamp is on (ignition has failed), press reset
button (light will go out) and ignition procedure will be
repeated.
To Next Page
Loading...
Need help?
General
