Worker Pinki - Handlebar Placement; Handlebar Height Adjustment

To Next Page

To Previous Page

STEP 2: HANDLE BAR PLACEMENT

WARNING: Failure to properly lock the push pins can result in handlebar movement and a loss of

control when using the product.

• Align the push pin and push pin hole (Part 1 & 2)

• Insert the handle bar end into the steering tube until the push pin locks into the hole securely

(Part 3)

• Repeat for the other side

STEP 3: HANDLE BAR HEIGHT ADJUSTMENT

• Open the handlebar clamp by releasing the lever in an outward position (Part 1)

• Extend the handlebar to the desired height (Part 2). When the handlebar extends to the

desired height either maximum or minimum height level, make sure the pin is aligned with the

pin hole (Part 3). DO NOT EXCEED THE HEIGHT OF THE TOP PIN HOLE

• Firmly close the clamp. Push the lever inward to the close position (Part4)