EasyManua.ls Logo

Worker Pinki - Assembly and Folding Instructions; Unfolding the Scooter

Worker Pinki
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
WARNING:
CHECK LOCAL LAWS REGARDING SCOOTER USE. Check local laws and regulations to see where
and how you may use your scooter legally. The use of a safety helmet may be compulsory.
CAUTIONS
Read the following instructions carefully before the first use:
1. Check and secure all fasteners before every ride. Always make sure the latches, clamps and
spring pins are locked properly. Also check the wheels and bearings.
2. Scooters are meant to be used only in controlled environments free of potential traffic hazards
and not on public streets, uneven surface or among pedestrians.
3. The brake cannot guarantee complete safety when riding downhill. It is the responsibility of the
rider to adjust his riding speed so that he could stop safely without the risk of falling.
ASSEMBLY AND FOLDING INSTRUCTIONS
STEP 1: UNFOLDING
Release the folding latch (Part 1) away from the scooter
Pull the plastic latch upwards (Part 2)
Pull the stem upwards until it clicks into place (Part 3)
Ensure that once it is in place that the folding latch is closed tightly to secure the upright
position of the scooter (Refer to Part 4)