Workplace Products TUFF HEAVY DUTY STORAGE WORKBENCH - User Manual

t. 01922 743 833 | e. sales@workplace-products.co.uk | w. workplace-products.co.uk
Workplace Products, Timmis Road, Lye, Stourbridge, West Midlands DY9 7BQ, United Kingdom
Information, data & specifi cations are correct at time of writing. E&OE. AK24072020.
TUFF HEAVY DUTY STORAGE WORKBENCHES
Page 1 of 4
• Once step one is completed, the next step is to do
the exact same with the other side of the middle
frame and the second leg frame.
• You can then add the second middle frame and
do the same.
ASSEMBLY INSTRUCTIONS
Parts Required
• Start with laying your worktop from an upside
down perspective.
• Place one leg frame and one middle frame
together. Use an allenkey and screws to join both
parts together. As displayed in right image.
• Once the middle frames are joirned to the legs,
you can then drill in to the holes provided to fi x
the frame on to the worktop. Shown in the right
image above.

Summary

Assembly Instructions

Parts Required for Assembly

Lists and illustrates all components and hardware needed to start building the workbench.

Adding Storage Units

Details the process of integrating cupboard or drawer modules into the workbench frame.

Final Assembly and Drawer Units

Instructions for assembling drawer units and safely completing the workbench setup.

Workplace Products TUFF HEAVY DUTY STORAGE WORKBENCH Specifications